V-Track V-20 Informer

V-Track V-20 Informer

SPECIFICATIONS
IP RatingIPx6 and IPx7
DesignationAutomatic Identification System (AIS) for AtoN
Power Supply12 to 24VDC nominal
Type 1 Power Consumption from 0.1Ah/day*
Type 3 Power Consumption0.8Ah/day*
* At 12.5W, reporting interval 3 minutes
Temperature Range-25°C to +55°C
Message 21 ContentMMSI Number, Name of AtoN, Position, Position Accuracy, RAIM Indicator
Type of Position Fixing Device, Time Stamp, Dimension of AtoN, Type of AtoN
Virtual AtoN Target Flag, 8 bits reserved for regional application
Transmitter Performance
TX Frequency Range156.025MHz to 162.025MHz in 25kHz steps
Frequency Accuracy±500Hz
Data Rage9,600 bps
TX Power Control2/5/12.5W (programmable)
Receiver Performance (Type 3 Only)
RX Frequency Range156.025MHz to 162.025MHz in 25kHz steps
Sensitivity-110dBm @ 20% PER
Standard ComplianceIEC 60945 Ed. 4, IEC 61162-1/2 Ed. 2 , IEC 62320-2 Ed. 1
IEC 61108-1, ITU-R M. 1371-4, IALA A-126 Ed. 1.4
Optional Sensor Board5- Isolated digital inputs
2 - Isolated analogue inputs
3 - Non isolated digital inputs
2 - Relay drive outputs
1 - Current sensor up to 5A
1 - IEC61162 -1 PORT AT 38400 baud
2 - RS232 ports
SDI-12 interface
InterfaceUSB for configuration
2 - IEC61162-1 Ports at 38400 baud
Physical
Diameter235mm high x 188mm
With Bird Spikes (optional)452mm high x 188mm
Weight1.2kg
NOTE: Specifications are subject to change

V-Track™ V10 Informer™ is an AIS information provider and remote monitoring system for use on marine aids to navigation (AtoN) and other structures. The V10 Informer™ is available in two options: “Type 1” is a transmit only device, and “Type 3” is a transmit and receive device that can also be used as an AIS repeater. For most applications a transmit only device provides the ideal AIS AtoN solution.
The V10 Informer™ is a compact unit housed in a rugged environmental enclosure for use on any AtoN.
With a power consumption of less than 0.5 Ah/day, the V10 Informer™ is suitable for all solar installations, including buoys anywhere in the world.
Tideland Signal has adopted the emerging IEC standards defining the functions and message structure contained within the AIS AtoN message. The V10 Informer™ is designed to comply with IEC and ITU requirements and also IALA recommendations. It is BSH approved.
In addition, both the V10 Informer™ "Type 1" and "Type 3" have optional remote monitoring capabilities.
It is capable of remote monitoring almost any manufacturer’s AtoN. When monitoring a Tideland Signal lantern the standard system provides: lantern status, battery voltage (loaded and unloaded) and an extra available input.
The V10 Informer™ broadcasts AtoN message 21 and also allows broadcasting of weather and sea data on message 6 or 8 as a Binary Message or as a Text Message on message 12 or 14. Remote monitoring information is broadcast on message 6.

AIS AtoN messages for predetermined MMSI numbers.
In its "Type 3" option, the V10 informer™ can also be controlled over the VHF data link (VDL). This is all possible through the configuration software.

FEATURES
PROGRAMMING SOFTWARE
The V10 Informer™ is supplied with a comprehensive software application that enables you to program the unit via an RS232 interface.
REPEATER OPTION
The V10 Informer™ "Type 3" has the capability of repeating the standard supported
VIRTUAL AND SYNTHETIC AtoN
There are situations that require the authorities in charge to create either virtual or synthetic aids to navigation using their existing AIS infrastructure. For these cases, the V10 Informer™ is ideal as it supports both virtual and synthetic AtoN.capability of repeating the standard supported AIS AtoN messages for predetermined MMSI numbers.
In its "Type 3" option, the V10 informer™ can also be controlled over the VHF data link (VDL). This is all possible through the configuration software.